The300 allows you to use time code (in any of the recognizedformats) to trigger
The &ZfIt List
Setup, Effect, and parameter changes.
Up to 50 time code entries can be made on an Event List. Time codes can be
enteredviathenumerickeypad,theycanbe “snapped”ontheflywhiletimecode
is running, or they can be selected with the soft knob.
Using time co& to
initiate program
To access the Event List simply press the front panel CONTROL button to enter
changes
Control mode, then use the Page Down button to step to the Event List display:
Pressing fiis button
enables/disables the Event List
Pressing 0~ of these buttons
selects a contwl page for the
Event List
Pressing the second button from the right on the top row allows you to choose
to have a Timecode Event list enabled (ON) or disabled (OFF).
Pressing any of the bottom row of buttons selects a page of controls for the item
displayed directly above that button. Four pages are available for: addition of
events to the list (ADD), deletion of items from the list (DEL), modification of
entries (EDIT), and “on the fly” insertion of items to the list (SNAP).
The 300 automatically sorts the Event List based on the time code addresses.
If you add a new event #will be placed oil the list at the appropriate place, and
other entries will move in posiGon. If you delete an entry, the remaining entries
will retain their relative positions, but will move up one position.
To Next Page
Loading...
