3oO V 3.0 0~~8s Manual Lexicon
Small Stereo Adjust
General Description
The Small Stereo Adjust algorithm is aversion of Stereo Adjust with some of the
specialized features omitted. It is designed to be put in a Cascade Setup ahead
of PONS.
I
--.
Cut, -16dB -,+6dB
Cut, -16dB - +6dS
O.l-26.5kHz
MchA
BASR
RTFIB TXLR
I
Stereo Adjustments Page
MSTR (Maater Fader)
SAL (Balance)
ROT (Rotate)
MSTR is a stereo level control, with both channels equally attenuated or
boosted. From -12 to +I2 the fader moves in .25 dB increments. Below -12 it
moves in SO dB increments. Below -60 dB the calibration comes in larger steps,
finally dropping to zero output at -72 dB.
BAL implements a sine/cosine balance adjustment. Balance is smoothly ad-
justed over a wide range, with excellent resolution in the critical area around
zero. The display indicates the actual channel gains as the control is varied.
ROT is similarto BAL, but it treats stereo information somewhat differently. Any
signal panned to the center (mono) will be treated by ROT exactly as it would be
treated by BAL. However, if a signal is panned full right and the control is moved
toward the right, instead of simply being attenuated (as BALwould do) the right
channel is inverted in phase and added to the lefl channel. A stereo image
appears to rotate when this control is used. Ambient information is preserved,
and both channels appear to retain equal loudness.
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
4-34
To Next Page
Loading...
