system operction
NOTE: Most studio applications assume aiOO% Wet mix. Most SINGLE
Setups are set with OMIX at 100% Wet. However, it is possible that some pre-
fade sends to the 300 will require the mix to be set to another value.
Dual Mono Setups (Setup Presets 201-225) are ‘Spiff configurations. Turn the
Soft knob to cue up different Dual Mono Setups. The top line of the display
Dua[ Mono Setups
indicates the Setup Preset number and the two types of effects loaded in the
Setup. The bottom display line ,shows which ‘Split” Effect is loaded into which
machine. In the Dual MonoSplit” configuration each DSP engine, Mach A and
Mach B, can run special Split Effect Algorffhms and Presets
Anaiogand/or Digttalformatscan beinput intothe300. Whenonlyone inputtype
(analog or digital) is specified, we refer to the format as “Fixed.”
When Analog is selected as the main Input source, the Digital l/O port can be
placed in a pre or post effect patch point. Conversely, if the Digital input is
selected as the main input source, Analog l/O connections can be used as a
patch point.
3-5
To Next Page
Loading...
