48kHz sample rate: 1OHz tp 21.5kHz, &0.2dB
8OdB maximum, 1OHz to 2OkHz
9OdB minimum, A-weighted
0.01% maximum, 1 OHz to 2OkHz
0.01% maximum
Balanced female XLR digital input; Balanced male XLR digital output
Conforms to both the AES ANSI S4.40-1965 spec and the EBU dot tech 3250.
Both input and output are transformer-coupled.
Input/output levels and impedance comply with CCilT V.11 EIA-42ZA specification.
Unbalanced coaxial “RC~ type digital inpui and output; SPDIF compatible
Optical (fiber optic) type digital input and output
Masva: 48kHzkSHz
Slave: 42 kHz to 5OkHz
44.1 kHz k5H7. 32kHz ~5%
Balanced female XLR, ElA-422 input, 1OOmV p-p minimum. Formats supported::
seed Ranae
SMPTE 0.75 to 1 .i 8
(Drop or Nondrop)
EBU 0.80 to 1.33
Film 0.82 to 1.33
5pin DIN comwctors provided for MIDI IN, MIDI OUT, and MIDI THRU
19.O”W ~3.5”H xl3.6”D (483xS9x346mm) 19” rack mount standard, 2U high
Net weight:lS.9 lbs (8.6 kg)
Shipping weight: 24.5 lbs (11.1 kg)
100/120/220/240 VAC (-lo%, +5%) 50.60 Hz
3-pin IEC power connector
75 VA maximum
Operating Temperawe: 32’to 95OF (O” to 35’ C)
Storage Temperature: -22O to 167OF (-30a to 75OC)
Humidity: 95% max without condensation
Two lines of 20 alphanumeric characters each
Level Soft Knob Bypass A and B
8 sofl buttons for Numeric Keypad Power Switch
parameter selection for data entry
and adjustment
Edit Keypad
CLA approval
Specifications subject to change without notice.
Specifications
Analog Input to Analog
Output (48kHz sampling rate)
Frequency Response
Crosstalk
Signal-to-Noise Ratio
Total Harmonic Distotiion
SMPTE lntermodula~ion
Distortion
Dynamic Range
Digital Audio Interfaces
AES/EBU
professional digital
audio interface
EIAJ CP-34OISPDlF
ccm.sumer digital
audio interface
Sample Frequency
Control Interfaces
Time Code Input
MIDI Interface
General
Dimensions
Weight
Power Requirements
Power Consumption
Environment
Front Panel Display
Front Panel Comrols
Safety Approvals
,O-3
To Next Page
Loading...
