Stereo Pitch Shift is a stereo or two-channel mono pitch shffter wlth several
useful eff ects, including predelay, feedback, and glide. These are independently
adjustable for each channel. The pitch shier in the 300 includes a pitch
detection feature which automatically adjusts the period of the splk%s to match
the pitch of incoming signals. This feature greatly reduces the artifacts associ-
ated wfth pitch shift. In stereo mode both channels are linked, and the sum of the
two channels (L & R) is used in the pitch detector. In mono mode each channel
splices independently. In either case it takes about 40 ms for the pitch detector
to obtain an optimal pitch value, Setting the LDLY and RDLY controls to this
value will give, the smoothest pitch shiit. Shorter values can be used for special
effetis, or when extra delay cannot be tolerated.
There are three interacting controls for pitch described below: Glide, Pitch
Interval, and Fine Pitch. Adjusting any pitch control activates a tong display that
shows the pitch percentage, the musical interval, and any fine adjustment in
cents. Always use this long display when matching Glide to Pitch Interval and
Fine Pitch.
..---
Mom/Stereo
-2 Get to +M7+4&
-2 m t0 +M7+4ac
PCHL
FfNL
PCHR
FINf?
0~510ms
o-9ax, Max
BNPS SYNC
O-5lOms
o-gas, Mex
I
Stereo Pitch Shift
General Description
Stereo Pitch
Shift Parameters
4.15
To Next Page
Loading...
