Lexicon 300 - Page 67

300 V 3.0 Owner’s Manual
Lexicon
FBKi , FBK2
FBKl and FBK2 determine the amount of recirculation passed back through to
the left and right inputs.
DLY3, DLY4
DLY3 (Oms-1OOOms) and DLY4 (Oms-1OOOms) are also picked off after the
diiusor. The level of each is controlled by LVL3 and LVL4, respectively.
LVL3,LVL4
LVL3 and LVL4 detem’rine the loudness of DLY3 and DLY4.
DLY.5, DLY6
DLY5 (Oms26OOms) and DLY6 (Oms26OOms) allow you to build nondiffused
recirculating echoes independent of the reverberator. Each has a feedback
control (FBK5 and FBK6).
FBK5, FBK6
FBK5 and FBK6 orovide feedback control for DLY5 and DLY6.
LVL6LVL6 LVL.5 and LVL6 determine the loudness of DLY5 and DLY6. Remember, these
are undiffused pre-echoes.