Lexicon 300 - Deleting an Event; Dumping the List to MIDI Storage Devices

Once you have created an Event List, you can also modify it by adding effect
changes. Select ADD. The display will show:
Adding art event
The ADDfunctiofi isused intwodifferemways.TodupliC2teanevent, pressthe
button directly above the Event number field and use the Soft knob to scroll to
the event that you want to copy. When you press STORE, the event will be
copied. (The copy will be placed directly afterthe original on the list.) To edii the
event effect, return to the main Time Code menu (by pressing CONTROL), then
press the button directly above “EDIT”.
Thesecondwayto usethe ADDfunctionallowsyou toeditanexistingeventand
add the edited version as a new event in the list. To do this, press the button
directly above the event number, anduse the Soft knobto scroll to the event you
want to start with. Now select the effect number, or the time code field, by
pressing the button directly above these display choices, and change the values
asneeded.Eachtimeyo”alteratime~deent~,pressENTER.Whenyo~ have
made all the changes you want, press STORE and the modified events will be
added to the list.
To delete an entry from the Event List, select DEL. The display will show:
Deleting an event
Selecting #XX allows soft knob selection from among the Event List entry
numbers (1-50). The time code associated with the event number isdisplayed
to the right. Press the key directly above “Del” to delete any event number from
the list. Notethat if an entry number is deleted from the list, all subsequent entries
will move up on the list.
The Event List can be transferred via MIDI data dump via the MIDI Control page Dumping the list to
in Control Mode.
MIDI storage devices