Lexicon 300 - Purgetools

system operatim
Select “Src” and use the Soft knob to designate a setup number (or the current
setup) to be copied: select “Dsr and use the Soft knob to specify the register
number where you want this copy stored. When you have made these selec-
tions, press STORE.
Selecting “EFY will cause a similar page to appearwhich allows you to copy the
effect and the patches used in any effect to any other register.
Selecting “MIDI” allows you to copy patches from one effect to another.
The Purge page allows you to delete all setup or effect registers, the MIDI
Page Nine
Program Change Map Table, or the Time Code Event List. It also allows
PurgeTools
reinitialization of a Lexicon demonstration (erasing all user effects and Time
Code Event List data), and a complete reinitialization of the system to its factory
configuration.
Selectino “FACTORY” restores the 300 to its factory mernorv
configur&n. This selection will destroy ail user modif&-
tions of the originHfaotory conffgurations.
setup registers.
I
\
Select “TGODE” to clear
Select “EFX” to clear ail ef-
the lime Code Event List.
feet registers.
Select “MIDI” to clear ihe
MIDI Program Change
Map Table.
Pressing any of the active buttons to select one of these options will cause the
display of a warning prompt. When ¶his prompt appears, press STORE to
execute the function.
Be careful! These functions permanently erase user information.
3.27