3oO V 3.0 Owner’s Manual
Overview of the
300 Display
Lexicon
Generally, the display will indicate a page of parameters, any of whim can be
selected by pressing the button directly above or below it In the example below,
the “RTIM” parameter has been selected and is highlighted by an underscore
cursor on the display.
2-6
Once selected, parameters can be adjusted overtheir entire range w#h the Soft
knob. The parameter and its current value will appear on the display as long as
the Soft knob is being adjusted.
Pressing the front panel VALUE key will display all of the current parameter
values for the selected page. in this example, pressing VALUE will cause the
following display to appear:
Here again, turning the Soft knob will adjust the selected parameter over its
entire range; the buttons will select other parameters for adjustment.
The PAGE UP and PAGE DOWN keys are used to access various pages Of
additional parameters (or parameter values) which can then be edited via the
Soft knob.
To Next Page
Loading...
