When working in a fffed format (with only analog or digital Dual Mono inputs),
each machine has its own level control. The outpu! of each level adjustment is
split to each soume balance control. Each Dual Mono Setup Preset defauits to
ABALpanned to LEPTONLY, and BBALpanned to RIGHTONLY. (AIN, ABAL,
BIN, and BBAL are located on Page Two of the Setup Edit mode.)
*If you had, for example, a piano in the left input and a voice in the right input and
bothBalancesweresetto5O%,asummedinputwithequalamountsof pianoand
voice would be passed to each DSP engine.
A dry signal is ptiked off before the signal passes into each Split DSP Eff eci. The
mono wet output of each DSP effect sums with the dry signal and is proponion-
ally mixedunderthe MlXcontrols:AMlXand BMlX.The thirdSETUP EDITpage
contains AMlXand BMIX.) Continuingwiththe aboveexample, if both AMlXand
BMIX were set to O%WET (or 100% DRY), you could use AIN and BIN as level
controls, mixing two independent signals to mono as parl of an analog or digital
process.
Cascade Setups are another type of “Split” configuration. They are numbered ck3.XKiS SetUpS
301-325 inSetupSeleCtmode. WhileinSetupSelectmode,youcanusetheSoft
knob to locate the Cascade Setups. Pressing ENTER will load two split type
programs: one in Machine A, the other in Machine B.
I
I
Patch Points
To Next Page
Loading...
