Reference Guide
split), Input levels, Source, Balances, LFO Rate and Shape,
and one (or two) Effects. These decisions are grouped to-
gether, named, and stored so they can be called up with a
single user action.
Single Setups unify both
All Single Setup Presets are
Machine A and Machine B
factory loaded with an Effect
into a single DSP engine.
of the same name. (The Ef-
fect number may not be the
same.)
Press B
An asterisk (*) in a Preset
then use the Soft knob to -name indicates that one or
select a setup Preset.
more paralleters are
When yo” have found a
patched to the Soft knob.
Press B to display
any Soft knob patches
made to Setup Effect para-
meters: press m to
showtheparamatervalues.
I
Single Setup Presets
Press v
. Turn fhe Soft knob to in-
PreSSI
ito view
Press nD!lato alternate
Press the buttons above or
crease or decrease the pa-
add%ionaJpxameter pages;
between a displav of pa-
/ ;z/h; ;,parameter label to
1 rameter value.
press 1
I
to re-
rameter nxnes and a dis-
turn to the main edit screen.
olav of their values
Once you have made changes to an Effect, remember that
you must not only store those changes in Effect Edit mode,
From Effect Edit mode,
From Setup Edit mode,
but also must store the Setup in which the Effect is loaded.
Press-. Turn the m press- Turn the
Soft knob to find an avail-
Soft knob to find an avail-
Note: If the 300 Copy Tools fun&n is set ho DISABLE, no STORE
able register, then press
able register, then press
functions can be perfwmed.This function is enabled in CNTRL n&e.
-again,
(Selection of CNTRL does not interrupt audio operation of the %a)
m again.
To Next Page
Loading...
