The 300’s Control Mode provides access to general global parameters and mis-
cellaneous functions. Selecting Control mode does not interrupt the audio
operation of the 300.
There are 9 Control mode pages:
1.
2.
3.
4.
5.
6.
7.
6.
9.
Set-up Configuration and Input type select (Analog and/or Digital),
Analog sample rate select, Digital locked, Digital input connector type,
Digital lnpu! format display and Digital Output format selection.
SCMS Detect and select
Digital emphasis detect and select
Effect Load select(Bypass, Mute) and Bypass function (lnpuf mute, Bypass
Copy Protect/Copy Tools for Setups, Effects, and MIDI Mod Edits
Purge (Delete) Toots for Time Code Event Lis.t,Ali Registers, Alt Effe&,
MIDI Map Table, and return to Factory Initialization.
Time Code Event List Management
MIDI Mode and MIDI Map Table
Note: The 300 Digital Effects System is shipped from the factory running in an
Analog Input, 4SkHz mode with Setup Preset S:PiOi SINGLE running Effect
Preset EA: PI01 Large Hall.
If you are already familiar wtth the operation of the 300 and wish to change the
Input to a Digital Type, simply enter Control mode and make your selections.
If you have no previous experience with the 300, we suggest you remain in the
analog mode and read on...
2-9
To Next Page
Loading...
