me Algorithms and mar hameters
Dual Delays Adjustments Page
FDLY is aseparate 20 ms ganged stereo delay linewhich is conWollable in single
FDLY (Flange Delay)
sample steps.
LFBD and RFEiD are base delays which get summed with the stereo ganged
LFi3D and RFBD
flange delay.These base delays are adjustable in single sample steps through-
(Left and Right Flange
out a 20 millisecond range. Base Delays)
LFLGand RFLGareflangegainswhichareadjustabeasafeedfo~ardamplifier
LFLG and RFLG
loop (+99% positive value) or feedback amplifier loop (-99% negative value).
(Left and Right
Flange Gain)
Dual Delays Diffusors, Feedback and Delays
DLYl and DLY2setthedelayvaluesforthe respective leftto IeftandrighHo right
DLYl and DLY2
feedback loops
FBKl and FEK2 set the gain of feedback for each of the delay lines. Available
FBKl and FBK2
values range from -99% to +99% gain.
APDI andAPD2arediffusors(AllPass Delays) inserieswiththefeedbackloops
APDl and APD 2
associated with DLW and DLY2. Their controls range from 0 to 10 ms. These
(All Pass Left and Right
controls essentially “lune” the diffuor delay line.
Delays)
APGl and APG2 are gains associated with the diiusors. You can think of them
APGl and APG 2
as conVoiling the amount of diffusion.
(All Pass Left and Right
Gain)
DLY3controlsthedelay~imewhichcros~feedbacks~othe input of DLY2. DLY4
DLY3 and DLY 4
conVois the delay time which cross-feedbacks to the input of DLYI.
FBK3 and FBK4 conVol the gain of the feedbacks going with each of their
FBK3 and FBK4
respective delay lines.
LDLY sets the left channel delay line’s time. RDLY sets the right channel delay
LDLY and RDLY
line’s time.
LPAN adjusts the left delay channel pan placement. RPAN adjusts the right
LPAN and RPAN
delay channel pan placemenf
4.25
To Next Page
Loading...
