Lexmark C510 Service Manual

2-84 Service Manual
5021-0XX
Operator panel service check
Printer emits 5 beeps when it detects a problem with operator panel
assembly, operator panel cable, controller RIP board or when a POR
does not complete. If operator panel operates properly, except for a
PEL or a few PELs missing or broken, run “LCD test” in diagnostic
mode. See “LCD test” on page 3-9 for details. If operator panel
fails any diagnostic test, replace operator panel.
Step Questions / actions Yes No
1 Ensure operator panel
cable is plugged into
operator panel and other
end of cable is plugged into
P2CN on engine controller
board. Is cable plugged in?
Go to step 2. Connect cable.
2 Ensure RIP board is
correctly plugged in. Is
cable plugged in?
Go to step 3. Connect cable.
3 Is operator panel display
blank, did 5 beeps emit
when printer was turned
ON and is LED off?
Replace
operator panel
assembly. If
problem
persists, go to
step 4.
Go to step 6.
4 Replace operator panel
cable. Does problem go
away?
Problem solved. Go to step 5.
5 Replace engine controller
board. See “Engine
controller board removal”
on page 4-55. Does
problem go away?
Problem solved. Go to step 6.
6 Does operator panel show
all diamonds and were
there no beeps when
printer was powered on?
Check RIP
board for proper
installation. If
properly
installed, replace
RIP board. See
“RIP board
removal” on
page 4-45.
Replace
operator panel.

Lexmark C510 Specifications

General

Certification	FCC Class B, UL 60950 3rd Edition, U.S. FDA, IEC 320-1, CSA, ICES Class B, Energy Star, Blue Angel, CE Class B, CB IEC 60950 IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, N Mark, C-tick mark Class B, CCC Class B
Product color	White
Built-in display	-
Color	Yes
Print technology	Laser
Maximum resolution	2400 x 2400 DPI
Time to first page (black, normal)	13 s
Time to first page (color, normal)	19 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	8 ppm
Maximum internal memory	320 MB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Maximum input capacity	780 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels, Plain paper, Transparencies
Paper tray media weight	60 - 120 g/m²
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet, Serial (RS-232)
Maximum duty cycle	- pages per month
Page description languages	PCL 6, PDF 1.3, PostScript 3
Package depth	645 mm
Package width	680 mm
Package height	670 mm
Package weight	40600 g
Operating altitude	0 - 2500 m
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 80 %
Power consumption (printing)	- W
Ethernet LAN	No

Weight and Dimensions

Depth	420 mm
Width	495 mm
Height	385 mm