4-32 Service Manual
5021-0XX
Waste toner bottle holder removal
1. Remove right cover. See “Right cover removal” on
page 4-22.
2. Disconnect waste toner bottle holder connector (A).
3. Remove two screws (B) from waste toner bottle holder.
4. Remove waste toner bottle holder from printer.
Developer drive assembly removal
1. Remove main motor assembly. See “Main motor assembly
removal” on page 4-38.
2. Remove waste toner bottle holder. See “Waste toner bottle
holder removal” on page 4-32.
AB
To Next Page
Loading...
