4-72 Service Manual
5021-0XX
Waste toner auger removal
1. Remove photodeveloper cartridge. See “Photodeveloper
cartridge removal” on page 4-11.
2. Remove transfer belt unit. See “Transfer belt unit removal” on
page 4-7.
3. Remove top cover assembly. See “Top cover assembly
removal” on page 4-18.
4. Remove transfer belt cleaning roller. See “Transfer belt
cleaning roller removal” on page 4-6.
5. Remove two screws (A) from waste toner auger; remove waste
toner auger.
To Next Page
Loading...
