Lexmark C510 - Right Cover Removal; Rear Cover Assembly Removal

4-22 Service Manual
5021-0XX
Right cover removal
1. Remove waste toner bottle. See “Waste toner bottle removal”
on page 4-10.
2. Remove top cover assembly. See “Top cover assembly
removal” on page 4-18.
3. Remove 2 screws (A) from bottom of right cover.
4. Remove right cover from printer. Maneuver front cover for easy
removal.
Rear cover assembly removal
1. Remove fuser assembly. See “Fuser assembly removal” on
page 4-9.
2. Remove transfer belt unit. See “Transfer belt unit removal” on
page 4-7.
3. Remove right cover. See “Right cover removal” on
page 4-22.