Menu item Description
TCP/IP
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
AutoIP
On
Off
Enable FTP/TFTP
On
Off
HTTP Server Enabled
On
Off
Lets you view or change the setting
Note: On is the factory default setting.
TCP/IP
WINS Server Address
DNS Server Address
Lets you view or change the setting
Note: This is a four‑field IP address.
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item Description
IPv6
Enable IPv6
Yes
No
Enables IPv6 in the printer
Note: Yes is the factory default setting.
IPv6
Auto Configuration
On
Off
Enables the network adapter to accept the automatic IPv6 address
configuration entries provided by a router
Note: On is the factory default setting.
IPv6
View Hostname
View Address
View Router Address
Shows the setting
Understanding printer menus 103
To Next Page
Loading...
