Loading the 520-sheet trays
The Size Sensing setting is only available for A5- and statement-size paper.
Loading the 520‑sheet trays
The printer has a standard 520‑sheet tray (Tray 1), and it may have one or more optional 520‑sheet trays. All 520‑sheet
trays support the same paper sizes and types. Paper may be loaded in the trays in either the long‑edge or short‑edge
orientation.
1 Grasp the handle, and pull the tray out.
2 Squeeze the width guide tabs together as shown, and move the width guide to the correct position for the paper
size being loaded.
Loading paper and specialty media 27
To Next Page
Loading...
