Lexmark C935 Series - Locking the Control Panel Menus

6 Press repeatedly until Yes appears, and then press .
A progress bar appears.
7 Press repeatedly until Exit Config Menu appears, and then press .
The printer performs its power‑on sequence, and then Ready appears.
Locking the control panel menus using the Embedded Web
Server
You can use the control panel lockout functionality to create a PIN and choose specific menus to lock. Each time a locked
menu is selected, the user will be prompted to enter the correct PIN. The PIN does not affect access through the
Embedded Web Server.
To lock control panel menus:
1 Open a Web browser. In the address bar, type the IP address of the printer or print server to be protected using
the format: http://ip_address/.
2 Click Configuration.
3 Under Other Settings, click Security.
4 Click Menu Lockout Setup.
Locking the entire printer
You can use the printer lockout functionality to create a PIN that must be entered in order to use the printer. When
the printer is locked, every print job it receives will buffer to the hard disk. To print the jobs, the user must enter the
correct PIN using the control panel.
Notes:
• A printer hard disk must be installed in the printer and working properly for the printer lockout functionality to
be available.
• Some data will continue to be processed while the printer is locked. Reports such as user or event logs can be
retrieved from a locked printer.
To lock control panel menus:
1 Open a Web browser. In the address bar, type the IP address of the printer or print server to be protected using
the format: http://ip_address/.
2 Click Configuration.
3 Under Other Settings, click Security.
4 Click Printer Lockout PIN.
Administrative support 151