Understanding printer messages
List of status and error messages
Activating Menu Changes
Wait for the message to clear.
Activating PPDS Mode
The PPDS emulator has been activated. Wait for the message to clear.
Bin <x> Full
Remove the stack of paper from the specified exit bin to clear the message.
Busy
Wait for the message to clear.
Calibrating
Wait for the message to clear.
Cancel not available
Wait for the message to clear.
Canceling
Wait for the message to clear.
Change <src> to <x>
• Press until Continue appears, and then press if the paper was changed.
• Press until Use Current appears, and then press to print on the paper currently in the printer.
• Cancel the current print job.
• For more information, select Show Me.
Understanding printer messages 112
To Next Page
Loading...
