• Envelopes are routed here.
• Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (5.8 in.).
Finisher standard bin
• The paper capacity is 500 sheets.
• Envelopes and executive‑size paper are not supported in this bin.
• Finishing options are not supported in this bin.
Bin 1
• The paper capacity is 3000 sheets when the standard finisher is installed.
• The paper capacity is 1500 sheets when the booklet finisher is installed.
Bin 1 finishing features
Size
Punch
*
Offset Single/double staple Double dual staple
A3
A4
A5 X X X X
Executive
X
Folio X
X
JIS B4
X
JIS B5
X
Legal X
X
Letter
Statement X X X
Tabloid X
Universal
Envelopes (any size) X X X X
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for
a 4‑hole punch.
Punch—Two‑, three‑, or four‑hole punch settings
Single staple—One staple
Double staple—Two staples
Double dual staple—Two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and 11.7 in.
(297 mm) with lengths between 7.2 in. (182 mm) and 17 in. (432 mm).
Paper and specialty media guide 46
To Next Page
Loading...
