Troubleshooting
Understanding the printer messages
Adjusting color
Wait for the process to complete.
Bin full. Remove paper.
Remove the paper stack from the standard bin.
Cannot collate large document [37]
Try one or more of the following:
• From the printer control panel, press to print the portion of the job already stored and begin collating the rest
of the print job.
• Cancel the current print job.
Change [paper source] to [custom string]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then press on the printer control panel.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Change [paper source] to [custom type name]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then press on the printer control panel.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Change [paper source] to [paper type] [paper size]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then press on the printer control panel.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Troubleshooting 138
To Next Page
Loading...
Need help?
General
