Action Yes No
Step 10
Check if you have selected the correct port settings in the printer driver.
Are the port settings correct?
Go to step 11. Use correct printer
driver settings.
Step 11
Check the installed printer driver.
Is the correct printer driver installed?
Go to step 12. Install the correct
printer driver.
Step 12
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Is the printer working?
The problem is solved. Contact
customer
support.
Printer display is blank
Action Yes No
Step 1
Press the Sleep button on the printer control panel.
Does Ready appear on the printer display?
The problem is solved. Go to step 2.
Step 2
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Do Please wait and Ready appear on the printer display?
The problem is solved. Turn off the printer,
and then contact
customer support.
Option problems
Cannot detect memory card
Action Yes No
Make sure the memory card is installed.
a Install the memory card. For more information, see “Installing a
memory card” on page 13.
Note: Check if the memory card is securely connected to the printer
controller board.
b Print a menu settings page, and then check if the card is listed in the
Installed Options list.
Is the card listed in the Installed Options list?
The problem is solved. Contact
customer
support.
Troubleshooting 149
To Next Page
Loading...
Need help?
General
