8 Insert the tray.
9 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper
loaded in the tray.
Note: Mixing paper sizes or paper types in a tray may cause jams.
Loading the manual feeder
The standard 250‑sheet tray has an integrated manual feeder that can be used to print on
dierent
types of
paper one sheet at a time.
1 Load a sheet of paper into the manual feeder:
• Printable side facedown for one-sided printing
• Printable side faceup for two‑sided (duplex) printing
Note: There are
dierent
ways for loading letterhead depending on the mode of printing.
One‑sided printing using a letterhead Two‑sided printing using a letterhead
ABC
ABC
• Load envelope with the flap side up and against the right side of the paper guide.
2 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.
Note: To achieve the best possible print quality, use only high‑quality media designed for laser printers.
3 Adjust the paper guides to the width of the paper loaded.
Warning—Potential Damage: Do not force the paper into the feeder. Forcing the paper may cause jams.
Loading paper and specialty media 45
To Next Page
Loading...
Need help?
General
