Understanding the printer control panel
Using the printer control panel
Use the To
1 Display
• View the printer status and messages.
• Set up and operate the printer.
2 Home button Go to the home screen.
3 Help button Go to the Help menus.
4 Clear all / Reset button Reset the default settings of a function, such as printing, copying, or e-mailing.
5 Keypad Enter numbers, letters, or symbols.
6 Sleep button Enable Sleep mode or Hibernate mode.
7 Cancel button Cancel all printer activity.
8 Start button Start a job, depending on which mode is selected.
9 Indicator light Check the status of the printer.
10 USB port Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Understanding the home screen
When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home
screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen;
or respond to messages.
Note: Your home screen may vary depending on your home screen customization settings, administrative
setup, and active embedded solutions.
Understanding the printer control panel 15
To Next Page
Loading...
Need help?
General
