3 Navigate to:
Copy to > select the tray that contains transparencies > Copy It
If there are no trays that support transparencies, then navigate to:
Manual Feeder > select the size of the transparencies > Transparency
4 Load transparencies into the multipurpose feeder, and then touch Copy It.
Copying on letterhead
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 From the home screen, navigate to:
Copy > Copy from > select the size of the original document
3 Tou ch Copy to > Manual Feeder.
4 Place the letterhead faceup, top edge first into the multipurpose feeder.
5 Select the size of the letterhead, and then touch Letterhead > Copy It.
Creating a copy shortcut using the printer control panel
1 From the home screen, touch Copy.
2 Adjust the copy settings, and then touch Save As Shortcut.
Note: If you change the settings after the copy shortcut has been created, then the settings are not
saved.
3 Type a unique name for the shortcut, and then touch .
4 Verify that the shortcut name is correct, and then touch OK.
If the shortcut name is incorrect, then touch Cancel, and then reenter the information.
Notes:
• The shortcut name appears in the Copy Shortcuts icon on the printer home screen.
• You can use the shortcut when copying another document using the same settings.
Customizing copy settings
Copying to a dierent size
1 Load an original document faceup, short edge
first
into the ADF tray or facedown on the scanner glass.
Copying 72
To Next Page
Loading...
Need help?
General
