55
What this light sequence means:
The printer is ready to receive and process data.
What you can do:
• Send a print job.
• Print a test page by pushing the operator panel
button with a brief button press.
• Cancel the job. Push the operator panel button until
all the lights come on to reset the printer.
What this light sequence means:
The printer is ready to receive and process data. In addition,
the toner in the print cartridge is getting low.
What you can do:
• Send a print job.
• Print a test page by pushing the operator panel
button with a brief button press.
• Remove the print cartridge and shake it to extend
the life of the cartridge.
• Replace the print cartridge.
• Cancel the job. Push the operator panel until all the
lights come on to reset the printer.
Note: The Toner Low light does not come on if
the standard 1,500-page print cartridge
is installed in the E320.
To Next Page
Loading...
