Lexmark E320/E322 - Restoring Factory Defaults

78
5
When the Error light and Press Button light blink, close the cover.
The special function menu is activated.
Restoring factory defaults
Sometimes resetting the printer to the original factory default settings solves formatting problems.
1 Enter the special function menu.
2 Press and release the operator panel button twice quickly (double-button press) until the Toner
Low light comes on and the two bottom lights blink.
3 Press the operator panel with a long button press (hold until all the lights come on) to reset the
printer to the original factory defaults.
Once the settings are returned to the factory default values, the printer returns to the Ready
state.