70
What this light sequence means when you press the
operator panel button with a double-button press from
the special function menu:
The printer has insufficient memory to free up unused space
in flash memory.
What you can do:
• Delete fonts, macros, and other data in RAM.
• Install additional printer memory and then issue a
PJL command to free up unused space in flash
memory.
What this light sequence means when you press the
operator panel button with a double-button press from
the special function menu:
The printer has an error communicating with the host
computer.
This light sequence is displayed if:
• Your printer is connected to the network, but it can’t
detect the print server when you first turn the printer
on.
• The computer attempts to communicate with the
printer through the parallel port, but the port setting
has been disabled in advanced troubleshooting
mode.
• The computer attempts to communicate with the
printer through the USB port, but the port has been
disabled in advanced troubleshooting mode.
–Continued–
To Next Page
Loading...
