Lexmark MC2425 User Manual

CAUTION—POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger
telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.
Setup 1: Printer is connected to a dedicated fax line
1 Connect one end of the telephone cable to the line port of the printer.
2 Connect the other end of the cable to an active analog telephone wall jack.
Notes:
• You can set the printer to receive faxes automatically (set Auto Answer to On) or manually (set Auto
Answer to O).
• If you want to receive faxes automatically, then set the printer to pick up on a specified number of rings.
Setup 2: Printer is sharing the line with an answering machine
Note: If you subscribe to a distinctive ring service, then make sure that you set the correct ring pattern for
the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes
automatically.
Faxing 66

Lexmark MC2425 Specifications

General

Scan Type	Flatbed, ADF
Duplex Printing	Automatic
Display	4.3-inch color touch screen
Scan Resolution	Up to 600 x 600 dpi
Fax	Yes
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Standard Connectivity	Ethernet, USB, Wi-Fi
Standard Paper Input	250 sheets
Maximum Paper Size	A4
Mobile Printing	Mopria, AirPrint
Memory	1024 MB