Lexmark MS312 - Exit Diags; Configuration Menu; Entering the Configuration Menu

The specific events that appear in the report vary depending on the operational history of the printer. Logs may
be printed from the following events:
• Job accounting log failures
• NV reset failures
• NV mirror entries
• 9yy and 1yy (print engine) service error entries
• Programming error entries
• Maintenance count reset entries
• Clear log entries
• Paper jam entries
• Firmware update entries
• JFFS2 partition format entries
• USB setup pkt info entries
• Supply event entries
To print the Event log:
From the Diagnostics menu, navigate to Event Log > Print Log.
Clear Log
Use this to remove all the current information in the Event log. This
aects
both the viewed log and the printed
log information.
To clear the event log:
1 From the Diagnostics menu, navigate to:
Event Log > Clear Log
2 Choose any of the following:
• Yes—To clear the Event log
• No—To exit the Clear log menu
Exit Diags
Select this to exit the Diagnostics menu. The printer performs a POR and restarts in normal mode.
Configuration menu
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer
for operation.
Entering the Configuration menu
1 Turn
o
the printer.
2 Press and hold OK and .
4514-330
Service menus
175