EasyManua.ls Logo

Lexmark MS312 - Jam, Standard bin [20 Y.XX]

Lexmark MS312
343 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails
inside the printer, and then insert the imaging unit into the printer.
8 Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside
the printer, and then insert the cartridge into the printer.
9 Close the front door.
10 From the printer control panel, press to clear the message and continue printing.
Jam, standard bin [20y.xx]
1 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2 From the printer control panel, press to clear the message and continue printing.
4514-330
Diagnostics and troubleshooting
81

Table of Contents

Other manuals for Lexmark MS312

Related product manuals