7 Remove the two screws (C) securing the control panel assembly.
C
8 Route all cables o the printer to completely remove the control panel assembly.
UICC removal
1 Remove the right cover. See “Right cover removal” on page 222.
2 Remove the nameplate. See “Nameplate removal” on page 236.
3 Remove the bezel. See “Bezel removal” on page 235.
4 Remove control panel assembly. See “Control panel assembly removal” on page 236.
5 Remove the three screws (A), and then remove the UICC.
Note: The control panel buttons and light pipe must remain with the control panel assembly.
4514-330
Parts removal
238
To Next Page
Loading...
