Paper menu
Vinyl label is supported only in MS710 Series printer models.
Default Source menu
Use To
Default Source
Tray [x]
Multipurpose Feeder
1
MP Feeder
2
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder or MP Feeder to appear as a menu setting.
• If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. When one tray
is empty, the print job continues using the linked tray.
1
This menu appears only in touch‑screen printer models.
2
This menu appears only in non‑touch‑screen printer models.
Paper Size/Type menu
Use To
Tray [x] Size
A4
A5
A6
JIS‑B5
Letter
Legal
Executive
Oficio (Mexico)
Folio
Statement
Universal
7 3/4 Envelope
9 Envelope
10 Envelope
DL Envelope
C5 Envelope
B5 Envelope
Other Envelope
Specify the paper size loaded in each tray.
Notes:
• Letter is the U.S. factory default setting. A4 is the international factory
default setting.
• If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. The
multipurpose feeder may also be linked. When one tray is empty, the
print job continues using the linked tray.
• The A6 paper size is supported only in Tray 1 and in the multipurpose
feeder.
Note: Only installed trays and feeders are listed in this menu.
Understanding the printer menus 186
To Next Page
Loading...
Need help?
General
