Lexmark MS810 Series User Manual

Clearing jams
Carefully select paper and specialty media and load them properly to avoid paper jams. If jams occur, then follow the
steps outlined in this chapter.
Note: Jam Recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold
the pages is needed for other printer tasks.
Avoiding jams
Load paper properly
• Make sure paper lies flat in the tray.
Correct loading of paper Incorrect loading of paper
• Do not remove a tray while the printer is printing.
• Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
• Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.
Clearing jams 260

Lexmark MS810 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Processor Speed	800 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	Up to 55 ppm
Standard Input Capacity	650 sheets
Maximum Input Capacity	4400 pages
Duplex Printing	Standard
Connectivity	USB, Ethernet
Print Languages	PCL 5e, PCL 6, PostScript 3
Maximum Paper Size	A4