Use To
Profiles List Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print Fonts
PCL Fonts
PostScript Fonts
Print a report of all the fonts available for the printer language currently set in
the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print Directory Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
• Job Buffer Size must be set to 100%.
• Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
• This menu item appears only when an optional flash drive or printer hard
disk is installed.
Asset Report Print a report containing printer asset information, such as serial number and
model name.
Network/Ports menu
Active NIC menu
Use To
Active NIC
Auto
[list of available network cards]
Allow the printer to connect to a network.
Notes:
• Auto is the factory default setting.
• This menu item appears only if an optional network adapter is installed.
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use To
Energy Efficient Ethernet
Enable
Disable
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
PCL SmartSwitch
On
Off
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Understanding the printer menus 198
To Next Page
Loading...
Need help?
General
