Use To
Edit Access Controls
Administrative Menus
Function Access
Management
Solutions
Cancel jobs at the Device
Control access to printer menus, firmware updates, held jobs, and other access
points.
Miscellaneous Security Settings menu
Note: This menu appears only in touch‑screen printer models.
Use To
Login Restrictions
Login failures
Failure time frame
Lockout time
Panel Login Timeout
Remote Login Timeout
Limit the number and time frames of failed login attempts from the printer control
panel before all users are locked out.
Notes:
• “Login failures” specifies the number of failed login attempts before users are
locked out. Settings range from 1 to 10. 3 attempts is the factory default
setting.
• “Failure time frame” specifies the time frame during which failed login
attempts can be made before users are locked out. Settings range from 1 to 60
minutes. 5 minutes is the factory default setting.
• “Lockout time” specifies how long users are locked out after exceeding the
login failures limit. Settings range from 1 to 60 minutes. 5 minutes is the
factory default setting.
• Panel Login Timeout specifies how long the printer remains idle on the printer
control panel before automatically logging the user off. Settings range from 1
to 900 seconds. 30 seconds is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging the user off. Settings range from 1 to 120
seconds. 10 minutes is the factory default setting.
Minimum PIN Length
1–16
Limit the digit length of the PIN.
Note: 4 is the factory default setting.
Confidential Print menu
Use To
Max Invalid PIN
Off
2–10
Limit the number of times an invalid PIN can be entered.
Notes:
• This menu appears only when a formatted, non-defective printer hard disk is installed.
• Once the limit is reached, the print jobs for that user name and PIN are deleted.
Note: Off is the factory default setting.
Understanding the printer menus 212
To Next Page
Loading...
Need help?
General
