Lexmark MS810 Series User Manual

• Install a hard disk with higher capacity.
Empty the hole punch box
Try one or more of the following:
• Empty the hole punch box.
• Select Continue on the printer control panel to clear the message and continue printing.
• Cancel the print job.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear the message
and continue printing. For non‑touch‑screen printer models, press
to confirm.
Imaging unit nearly low [84.xy]
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
to confirm.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the
User’s Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
to confirm.
Incompatible output bin [x] [59]
Try one or more of the following:
• Remove the indicated bin.
• Select Continue on the printer control panel to clear the message and continue printing without using the specified
bin. For non-touch-screen printer models, press
to confirm.
Troubleshooting 285

Lexmark MS810 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Processor Speed	800 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	Up to 55 ppm
Standard Input Capacity	650 sheets
Maximum Input Capacity	4400 pages
Duplex Printing	Standard
Connectivity	USB, Ethernet
Print Languages	PCL 5e, PCL 6, PostScript 3
Maximum Paper Size	A4