21
Set up the printer
1
Pull open trays 2 and 3.
2
Attach locking clips to the left
and right sides of the trays, as
shown.
a
Insert the bottom of each
clip into the slot on tray 3.
b
Attach the top of each clip to
tray 2 with a screw.
3
Close trays 2 and 3.
4
Move to the back of the printer.
5
Attach two more locking clips
to the back of the printer, as
shown.
6
Skip to “Removing packaging
from the trays” on page 28.
To Next Page
Loading...
