23
Set up the printer
2
Carefully place the printer on
top of the 500-sheet drawers.
Be sure to align all four corners on
the bottom of the printer with the
corners on the top drawer.
Attaching the locking clips
The instructions that begin on page 24
explain how to attach the locking clips
that secure trays 2, 3, and 4 to the
printer. The procedure requires a Phillips
screwdriver.
Warning!
Failure to secure the trays
with the locking clips could affect the
position of the printed image on the
page, and could result in paper feeding
problems.
Be sure to attach all of the
locking clips
.
To Next Page
Loading...
