57
Install memory and option cards
Attaching a hard disk
Complete the following steps to attach a
hard disk to your printer system board.
1
Complete the steps in “Access-
ing the printer system board”
on page 46.
2
Attach the hard disk to the
metal bracket.
a
Slide the hard disk all the
way into the metal bracket.
b
Align the holes on the top of
the hard disk with two of the
holes on the metal bracket.
The holes on the hard disk
you’re installing may line up
with different holes than the
ones illustrated.
c
Insert a screw into each of
the two holes on the metal
bracket.
d
Tighten each screw.
To Next Page
Loading...
