Lexmark T656dne - Page 58

2-22 Service Manual
4062
Go Back
Previous
Next
201.57 Sensor (fuser output)
late jam
Type 1 fuser
Fuser page count has
exceeded life
The media is late reaching the
sensor (fuser output) within the
specified time.
Go to sensor (fuser output) late
jam service check.
See “Sensor (fuser output)
late jam service check.” on
page 2-127.
201.75 Sensor (fuser output)
late jam
Type 2 fuser
Fuser page count has
exceeded life.
The media is late reaching the
sensor (fuser output) within the
specified time.
Go to sensor (fuser output) late
jam service check.
See “Sensor (fuser output)
late jam service check.” on
page 2-127.
201.76 Main drive motor
assembly load error.
Type 2 fuser
Fuser page count has
exceeded life.
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
1. Remove all media present
in media path.
2. Check all connections on
the main drive motor
assembly.
3. Check all connections on
the system card assembly.
4. Replace the main drive
motor assembly if problem
remains. Go to “Output
cover assembly removal”
on page 4-53.
201.77 Sensor (fuser output)
late jam
Type 2 fuser
Fuser page count has
exceeded life.
The media is late reaching the
sensor (fuser output) within the
specified time.
Go to sensor (fuser output) late
jam service check.
See “Sensor (fuser output)
late jam service check.” on
page 2-127.
201.78 Image data did not
start in time
Type 2 fuser
Fuser page count has
exceeded life
Printhead write failure 1. Check all connections on the
printhead assembly
2. Check all connections on the
system card assembly.
3. Replace the printhead
assembly if problem remains.
4. Replace the system card
assembly if problem remains.
Go to “System card
assembly removal” on
page 4-75.
201.79 Sensor (narrow
media) late jam
Type 2 fuser
Fuser page count has
exceeded life
The media is late reaching the
sensor (narrow media) within
the specified time.
Go to sensor (narrow media)
late jam service check.
See “Sensor (narrow media)
late jam service check.” on
page 2-131.
Error
code or
message
Error contents Description/Action Possible repair actions