EasyManuals Logo

Lexmark X46X Series User Manual

Lexmark X46X Series
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is required.
Contact your DSL provider for a DSL filter. The DSL filter removes the digital signal on the telephone line that can
interfere with the ability of the printer to fax properly.
You do not need to attach the printer to a computer, but you do need to connect it to an analog telephone line
to send and receive faxes.
Equipment and service options Fax connection setup
Connect directly to the telephone line See “Connecting to an analog telephone line” on page 122
Connect to a Digital Subscriber Line (DSL or ADSL)
service
See “Connecting to a DSL service” on page 122.
Connect to a Private Branch eXchange (PBX) or
Integrated Services Digital Network (ISDN) system
See “Connecting to a PBX or ISDN system” on page 123.
Use a Distinctive Ring service See “Connecting to a distinctive ring service” on page 124.
Connect to a telephone line, telephone, and answering
machine
See “Connecting the printer and a telephone or answering machine
to the same telephone line” on page 124
Connect through an adapter used in your area See “Connecting to an adapter for your country or region” on
page 126.
Connect to a computer with a modem See “Connecting to a computer with a modem” on page 131.
Connecting to an analog telephone line
If your telecommunications equipment uses a USstyle (RJ11) telephone line, then follow these steps to connect the
equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Connecting to a DSL service
If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then
follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to the DSL filter.
Note: Your DSL filter may look different than the one in the illustration.
Faxing 122

Table of Contents

Other manuals for Lexmark X46X Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark X46X Series and is the answer not in the manual?

Lexmark X46X Series Specifications

General IconGeneral
BrandLexmark
ModelX46X Series
CategoryPrinter
LanguageEnglish

Related product manuals