EasyManuals Logo

Lexmark X46X Series User Manual

Lexmark X46X Series
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
8 Enter your PIN.
9 Touch the job you want to print.
10 Touch Print, or touch the arrows to increase or decrease the number of copies, and then touch Print.
Printing from a flash drive
A USB port is located on the printer control panel. Insert a flash drive to print supported file types. Supported file types
include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx.
The following flash drives are tested and approved for use with the printer:
• Lexar FireFly (512 MB or 1GB)
• SanDisk Cruizer Micro (512 MB or 1 GB)
• Sony (512 MB or 1GB)
Notes:
• Hi‑Speed flash drives must support the USB 2.0 specification, specifically supporting the High Speed mode.
• USB devices must support the FAT (File Allocation Tables) system. Flash drives formatted with NTFS (New
Technology File System) or any other file system are not supported.
• Before printing an encrypted .pdf file, you will be prompted to enter the file password from the printer control
panel.
• You cannot print files for which you do not have printing permissions.
• Some USB drives and USB hubs are not supported.
To print from a flash drive:
1 Make sure the printer is on and Ready appears.
2 Insert a flash drive into the USB port.
Printing 98

Table of Contents

Other manuals for Lexmark X46X Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark X46X Series and is the answer not in the manual?

Lexmark X46X Series Specifications

General IconGeneral
BrandLexmark
ModelX46X Series
CategoryPrinter
LanguageEnglish

Related product manuals