Installing the printer on a wireless network (Macintosh)
Before you install the printer on a wireless network, make sure that:
• A wireless card is installed in your printer.
• Your wireless network is set up and working properly.
• The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided:
MAC address: ___ ___ ___ ___ ___ ___
2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
3 From the printer control panel, select your language and country or region, and then touch Continue.
4 Select your time zone, and then touch Continue.
5 Deselect any function you plan to set up later, such as Fax or E‑mail, and then touch Continue.
Additional printer setup 58
To Next Page
Loading...
Need help?
General
