6 Connect an additional telephone cord from the computer modem LINE port to the printer EXT port .
Enabling the fax function
The fax function must be enabled prior to use. If you disabled the fax function when setting up the printer for the first
time or if the printer has been off for an extended time, then follow these steps:
Note: Before completing these instructions, make sure the fax cables are connected. For more information, see
“Choosing a fax connection” on page 121.
1 Touch Menus.
2 Touch Settings.
3 Touch General Settings.
4 Touch the left or right arrow next to Run initial setup to select Yes.
5 Touch Submit.
Submitting changes appears.
6 Turn off the printer, connect the fax cables, and then turn the printer back on.
7 From the printer control panel, select your language.
8 Select your country or region, and then touch Continue.
Faxing 132
To Next Page
Loading...
Need help?
General
