Load up to Make sure
10 sheets of:
• Custom paper
• Pre-punched paper
• Reinforced edge copier paper
• Preprinted forms
• Letterhead paper
• You adjust the paper guide on the ADF tray to the width of the
original document.
• The original document is loaded facedown, top edge first, until
you hear a beep.
• The paper size fits within these dimensions:
Width:
– 210.0 mm–215.9 mm
– 8.25 in.–8.5 in.
Length:
– 279.4 mm–355.6 mm
– 11.0 in.–14.0 in.
• You allow preprinted media to dry thoroughly before loading
into the ADF.
• You do not use media printed with metallic ink particles.
• You avoid embossed designs.
Related topics:
• “Understanding the parts of the printer” on page 88
• “Loading original documents on the scanner glass” on page 20
Faxing
54
To Next Page
Loading...
