Lexus LS 460 - HOW TO USE THE Remote Touch

32
1. BASIC INFORMATION BEFORE OPERATION
LS460_600h_Navi_U
2. HOW TO USE THE Remote Touch
1 Use the Remote Touch knob to select
the desired button on the screen.
2 To select the button on the screen, press
the Remote Touch knob. Once a button
has been selected, the screen will
change.
 When the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be
adjusted. (P. 57)
 The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
 “” and “” buttons on the Remote Touch
can be used to scroll up and down on list
screens.
With navigation function: Press the “ ” but-
ton on the Remote Touch to zoom in on the
map screen and the “ ” button to zoom
out.
 When is displayed on the screen,
select to return to the previous
screen.
 Press the “MENU” button on the Remote
Touch to display the “Menu” screen. (P.
14)
 Without navigation function: The compass
screen can be displayed by pressing the
button on the Remote Touch.
 With navigation function: The map screen
can be displayed by pressing the “MAP/
VOICE” button on the Remote Touch.
(P. 77)
This system can be operated by the
Remote Touch when the engine
<power> switch is in ACCESSORY or
IGNITION ON <ON> mode.