Lexus LS 460 - Calling the Message Sender

381
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
PHONE
LS460_600h_Navi_U
8
2 Select corresponding to the de-
sired message to edit.
3 Select “OK” when editing is completed.
■ CALLING FROM E-MAIL/SMS/
MMS MESSAGE DISPLAY
1 Display the message inbox screen.
(P. 377)
2 Select the desired message.
3 Select .
 If there are 2 or more phone numbers,
select the desired number.
4 Check that the “Call” screen is dis-
played on the “Side Display”.
INFORMATION
●To reset the edited quick reply messages,
select “Default”.
●“Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”)*:
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.
*: With navigation function
CALLING THE MESSAGE
SENDER
Calls can be made to an e-mail/SMS/
MMS message sender’s phone number.
This operation can be performed while
driving.